Digi Coat Adhesion Promoter - helps you achieve superior adhesion to surfaces
Digi Coat pre-treatment is a specially formulated compound that has a high affinity for glass, ceramic and polished metals, which enables it to form robust physical bonds with such surfaces. It is also engineered to react chemically with the special range of Digi Coat products, hence providing a strong adhesive link between coating and surface.
The use of Digi Coat pre-treatment on glass, ceramic and polished metal surfaces prior to coating, improves the overall durability, and chemical and water resistance of the applied Digi Coat coatings. Failure to use the pre-treatment can result in de-lamination of the applied coating when exposed to wet conditions, especially on glass, glazed ceramic and polished metal surfaces.
Watch Videos of Digicoat in Use
- Watch a Demonstration of Digi Coat on Glass
- Watch a Demonstration of Digi Coat on Wood
- Watch a Demonstration of Digi Coat on Metal
- Watch a Demonstration of Digi Coat on Ceramics
Instructions for Use
- Ensure all surfaces to be pre-treated are clean, and free from dirt or grease
- Apply compound liberally with a paper tissue or kitchen paper all over the surface to be coated, trying to ensure an even coverage.
- Allow the compound to bond with the surface for approximately 30 seconds, before removing any excess with clean tissue. When removing the excess, try to eliminate any greasy smudge marks.
Pricing
For more information on pricing please contact one of our dealers