Specialised Digital Coatings
Call us on now on: +44 (0) 114 257 1632
Clear Sublimation Coating - A Simple solution for creating unique & innovating substrates
Designed to enable the transfer of an image to any product or surface using sublimation ink. Digi Coat clear is primarily aimed at light coloured hard and soft substrates.
Sounds Interesting tell me more!
In order to transfer an image to any product or surface using sublimation ink, that product or surface must be “sublimation receptive”.
This is not a problem when using specialty sublimation substrates but natural and untreated surfaces like wood, metal, ceramic, leather, stone, glass and other items pose a real challenge to the digital decorator.
To accept a sublimation transfer, these products must be treated with a polymer coating that when cured allows the sublimation inks to transfer onto the product. Digi Coat Clear was created for just this challenge. It is a simple-to-use; clear base coating that allows you to create your own range of unique and normally unprintable sublimation consumables.
The coating cures at 160 degrees for 15-20 minutes.
How to use Digi Coat Blue
- Shake can well for 1 minute
- Ensure the surface to be coated is clean dry and free from grease
- For best results apply Digi Coat in an even motion holding the can approx 250mm (10") from surface using light passes at room temperature. Using multiple passes for a high gloss finish
- Allow to air dry for 10 minutes and then cure in oven at 160°C (320°F) for 15-20 minutes
Digi Coat Sublimation Substrate Coating Products
Watch our tutorial video and learn from the pros
Digi Coat dealer list and pricing
Download the Digi Coat price list find it here
Download MSDS Here
To help you get the most out of Digi Coat download
See other sublimation videos by Digi Coat
Watch our videos & get even more out of Digi Coat.
