Digi Coat Clear Sublimation Coating - a simple solution for creating unique and innovative substrates
In order to transfer an image to any product or surface using sublimation ink, that product or surface must be “sublimation receptive”.
This is not a problem when using specialty sublimation substrates. But natural and untreated surfaces like wood, metal, ceramic, leather, stone, glass and other items pose a real challenge to the digital decorator. To accept a sublimation transfer, these products must be treated with a polymer coating that when cured allows the sublimation inks to transfer onto the product.
Digi Coat Clear was created for just this challenge. Digi Coat Clear is a simple-to-use, clear base coating that allows you to create your own range of unique imprintable sublimation consumables.
Watch Videos of Digicoat in Use
- Watch a Demonstration of Digi Coat on Glass
- Watch a Demonstration of Digi Coat on Wood
- Watch a Demonstration of Digi Coat on Metal
- Watch a Demonstration of Digi Coat on Ceramics
Instructions for Use
- Shake can well for 1 minute
- Ensure the surface to be coated is clean dry and free from grease
- For best results apply Digi Coat in an even motion holding the can approx 250mm from surface using light passes at room temperature. Using multiple passes for a high gloss finish.
- Allow to air dry for 10 minutes and then cure in oven at 160°C for 15-20 minutes
Pricing
For more information on pricing please contact one of our dealers