Designed to be used in conjunction with Digi Coat Clear, enabling stunning quality sublimation printing on glass. It permits sublimation ink to pass through the white coating to sit above it, producing strong vibrant images.

Sounds Interesting tell me more!

Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. Sublimated images must however be applied to the back of the glass. The results of the final image cam be disappointing and appear washed out and faded unless the transfer is top coated with a finish.

Digi Coat Translucent White provides a solution. It is a specially developed to enable the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass! This coating is applied as an overcoat to Digi Coat Clear and cures at 160 degrees for 15-20 minutes.

How to use Digi Coat Green

• Shake can well for 1 minute
• Ensure the surface to be coated is clean dry and free from grease
• Prime surface with adhesion promoter
• Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm (10")
• Cure in oven at 160°C (320°F) for 15-20 mins

Digi Coat Sublimation Substrate Coating Products

Watch our tutorial video and learn from the pros

Digi Coat dealer list and pricing

Download the Digi Coat price list find it here

Download MSDS Here

To help you get the most out of Digi Coat download

See other sublimation videos by Digi Coat

Watch our videos & get even more out of Digi Coat.

• Digi Coat on glass
• Digi Coat on wood
• Digi Coat on metal
• Digi Coat on ceramics

Other Digi Coat Sublimatiop Products

• 
• 
• 
• 
•