Digi Coat Translucent White Coating - for stunning sublimation images on glass
Decorating glass products like tiles or cutting boards with sublimation inks can produce stunning images. However, since sublimated images must be applied to the back of the glass, unless the transfer is top coated with a finish coat the image will appear washed out and faded.
Digi Coat Translucent White provides a solution. Digi Coat Translucent White is a specially developed coating that allows for the sublimation image to transfer straight through and to fix itself in the clear coating below and resulting in a vibrant image. No more washed out images on glass!
Watch Videos of Digicoat in Use
- Watch a Demonstration of Digi Coat on Glass
- Watch a Demonstration of Digi Coat on Wood
- Watch a Demonstration of Digi Coat on Metal
- Watch a Demonstration of Digi Coat on Ceramics
Instructions for Use
- Shake can well for 1 minute
- Ensure the surface to be coated is clean dry and free from grease
- Prime surface with adhesion promoter
- Coat glass first with Digi Coat Clear (allow to air dry for 5 mins) then apply Translucent White over clear coating. Only a fine coat is required. For best results apply at room temperature from a distance of around 250mm.
- Cure in oven at 160°C for 15-20 mins
- Coverage approximately 2m2
Pricing
For more information on pricing please contact one of our dealers